Solar Mounting Accessories
We provide a complete range of solar mounting accessories to complement our racking systems. This includes mid/end clamps, grounding lugs, bolts and nuts, spring washers, sealing caps, and all necessary installation hardware. All accessories are manufactured to precise tolerances and use corrosion-resistant materials for long-term outdoor durability.
Key Facts
- Product:
- Solar Mounting Accessories
- Material:
- Stainless steel 304/316 + anodized aluminum
- Surface:
- Stainless steel / anodized aluminum
- Design life:
- 25 years
- Load ratings:
- Wind 60 m/s · Snow 1.5 kN/m² · −40°C to +85°C
- Applications:
- Solar panel clamping · Grounding and bonding · Structural fastening
Cross Section Detail
* Schematic diagram for reference. Actual dimensions confirmed based on project requirements. CAD drawings available upon request.
Technical Parameters
| Material | Stainless steel 304/316 + anodized aluminum |
| Surface Treatment | Stainless steel / anodized aluminum |
| Standard Length | Up to 12m (custom cut available) |
| Design Life | 25 years |
| Wind Load | Up to 60m/s (project specific) |
| Snow Load | Up to 1.5kN/m² (project specific) |
| Temperature Range | -40°C to +85°C |
| Certification | Factory inspection certificates & third-party MA test reports available |
* Load values are reference ranges. Project-specific calculations provided with quotation.
Key Features
Applications
Customization Options
Standard Installation Process
Site Survey
Assess terrain, soil, wind/snow load, and panel layout.
Foundation
Pile driving, concrete footings, or ballast based on site type.
Post & Beam
Install main posts, beams, and purlins per shop drawings.
Module Mounting
Install rails, clamps, and mount PV modules in sequence.
Grounding
Connect grounding lugs, verify continuity, install bonding.
Inspection
Final torque check, alignment verification, and handover.
* Installation guidance provided with every order. On-site technical support available for large projects.
Frequently Asked Questions
What is the Solar Mounting Accessories?+
Complete range of solar mounting accessories: clamps, bolts, nuts, washers, and hardware. It is manufactured in Stainless steel 304/316 + anodized aluminum with Stainless steel / anodized aluminum surface treatment, designed for a 25-year service life with wind load capacity up to 60 m/s and snow load up to 1.5 kN/m².
What material is the Solar Mounting Accessories made of?+
The system uses Stainless steel 304/316 + anodized aluminum with Stainless steel / anodized aluminum. This combination is selected for outdoor durability, corrosion resistance and structural strength over the full 25-year design life.
Can the Solar Mounting Accessories be customized for my project?+
Yes. HAOQIN customizes every project: dimensions, load configurations, foundation type, tilt angle and accessories. Send your site conditions and layout for a tailored engineering proposal with load calculations.
What applications is the Solar Mounting Accessories suitable for?+
Typical applications include: Solar panel clamping, Grounding and bonding, Structural fastening, System sealing and protection. HAOQIN exports to 50+ countries with full documentation including load calculation reports and installation manuals.
Request a Quote for Accessories
Tell us your project details. We'll respond with configuration and pricing within 24 hours.
